15822962228@qq.com +86-15822962228
The correct posture for radiator maintenance!
Addtime:2022-06-17        Hits:4        Back to list


Maintenance is very important no matter where it is placed, and it is also crucial to the use of household appliances. Not to mention heating equipment. If heating equipment wants to have a long service life, in addition to normal use and regular cleaning, equipment maintenance also accounts for a large part. Next, the editor of Elmar steel plate radiator will take you to understand.



When the heating system is running for the first time, remember to debug it. Adjust each standpipe valve to the appropriate position, open the manual air release valve of each radiator, and exhaust the air stored in the equipment. You can also open the exhaust valve of the air collecting tank at the top of the installation system to exhaust the air. , until each radiator in the room is heated up, it can be regarded as the debugging is completed. But remember that if the equipment debugging is completed, the valve needs to be firmly fixed and cannot be opened and closed at will.



The place where the radiator is installed in the room should have a certain amount of cooling space as much as possible. Do not stack debris on or in front of the radiator, as this will affect the heat dissipation effect of the radiator.


Do not change the position of the radiator after installation. Before the radiator is installed, its installation position is designed to be conducive to indoor heating, which can effectively ensure air convection and the temperature of each corner of the room is relatively average. If we arbitrarily change the installation location of the equipment, it will cause the indoor temperature to be unbalanced, and one place will be hot and one place will not be hot. In addition to the pipeline, if the radiator is transplanted, it is easy to leak, causing unnecessary losses to the home.



The water in the heating system should not be released at will. If there is no hot water in the pipeline, cold water should be added, which will cause the pipe network system to maintain a certain pressure. The more hot water is lost, the water temperature in the pipe network will drop rapidly, causing indoor temperature decreases. Here is a reminder for friends who use steel radiators to close the valve in time when heating is stopped, so that the radiator is filled with water, which can prolong the practical life. Conditional copper-aluminum composite radiators can also be filled with water for maintenance.



The temperature of the radiator is hot every year, and maintenance is a particularly critical step. And it should be used correctly at ordinary times to ensure that the service life of the radiator is not shortened.



1. After the heating season is over, in case of central heating, just close the heating inlet and return water valves in time to fill the heating interior with water. If it is an independent home heating, it can have higher maintenance requirements for the heating system. When the pump is stopped for maintenance, it can be partially or fully discharged, and then refilled, heated, exhausted, and the pump stopped.



2. Before the heating installation is completed and put into use, a pressure test should be carried out, and the system should be flushed and exhausted to achieve full water operation.



3. Before the coming of the next heating season, users of independent heating can decide whether to change the water or not to run it according to the water quality.


Aymar steel plate radiator warm reminder:


Although the radiator is only used in winter, reasonable maintenance measures should be taken to prolong its service life when it is usually idle. On weekdays, soft towels and brushes should be used to clean the surface, and organic solutions should not be used for cleaning.